The Premium Factory-Original Fix for Bent, Warped, or Permanently Grimy Oven Wire Shelves

When your cooker's interior wire racks become warped under heavy roasting loads, lose their level tracking along the side runners, or accumulate years of stubborn, carbonized fat that refuses to clean off, it compromises kitchen safety and compromises cooking results. Avoid low-tolerance universal telescopic replacement shelves that clip together loosely, rattle violently under convection air currents, or slide past their safety stops unexpectedly. The Genuine Electrolux Group Wire Shelf & Grill Grid Pan Insert (140067172050 / 7321423929192) perfectly matches your oven's original molded track tolerances to restore day-one structural tracking.

Manufactured directly by the Electrolux-AEG component group, this rigid steel frame features an advanced rust-resistant polished chrome surface treatment. Measuring exactly 468mm in length by 382mm in width with a sturdy 23.6mm safety lip profile, it functions seamlessly across thousands of standard built-in cavities. When used inside a matching enameled pan, the spaced mesh spacing lets meat fats and grease drain away cleanly from your steaks, chops, and vegetables, preventing toxic smoke and flares. When used on its own, its heavy-gauge steel wires support heavy stoneware and roasting pans without bowing.

Key Performance Features:
* Integrated Safety Anti-Tilt Stops: Raised rear outer edges prevent the shelf from sliding all the way out accidentally when pulling out heavy baking trays.
* Flat Convection Vent Grid: Even wire spacing guarantees unhindered heat distribution from rear fan elements, ensuring no half-baked spots.
* Zero Tool DIY Upgrade: Takes less than 10 seconds to install—simply pull out your old grease-caked or bent rack and slide this fresh OEM mesh straight into place.

Technical Specifications:
* Brand: Genuine Electrolux Group (AEG / Zanussi / Ikea OEM Spares)
* Component Designation: Chrome Wire Shelf / Drop-In Grill Pan Grid Insert
* Factory Master MPN: 140067172050
* Alternative Factory Cross-References: 140064796018, 5616572011, 5617733018
* Global Logistics EAN: 7321423929192 (Alternative legacy EAN: 7321422870631)
* Structural Length (Horizontal Edge): 468 mm (46.8 cm)
* Structural Width (Vertical Depth Edge): 382 mm (38.2 cm)
* Structural Mesh Height (Thickness): 23.6 mm
* Casing Formulation: Electroplated Gloss Chrome Steel Core Wire
* Net Component Weight: 878 grams

The Premium Factory-Original Fix for Bent, Warped, or Permanently Grimy Oven Wire Shelves

When your cooker's interior wire racks become warped under heavy roasting loads, lose their level tracking along the side runners, or accumulate years of stubborn, carbonized fat that refuses to clean off, it compromises kitchen safety and compromises cooking results. Avoid low-tolerance universal telescopic replacement shelves that clip together loosely, rattle violently under convection air currents, or slide past their safety stops unexpectedly. The Genuine Electrolux Group Wire Shelf & Grill Grid Pan Insert (140067172050 / 7321423929192) perfectly matches your oven's original molded track tolerances to restore day-one structural tracking.

Manufactured directly by the Electrolux-AEG component group, this rigid steel frame features an advanced rust-resistant polished chrome surface treatment. Measuring exactly 468mm in length by 382mm in width with a sturdy 23.6mm safety lip profile, it functions seamlessly across thousands of standard built-in cavities. When used inside a matching enameled pan, the spaced mesh spacing lets meat fats and grease drain away cleanly from your steaks, chops, and vegetables, preventing toxic smoke and flares. When used on its own, its heavy-gauge steel wires support heavy stoneware and roasting pans without bowing.

Key Performance Features:
* Integrated Safety Anti-Tilt Stops: Raised rear outer edges prevent the shelf from sliding all the way out accidentally when pulling out heavy baking trays.
* Flat Convection Vent Grid: Even wire spacing guarantees unhindered heat distribution from rear fan elements, ensuring no half-baked spots.
* Zero Tool DIY Upgrade: Takes less than 10 seconds to install—simply pull out your old grease-caked or bent rack and slide this fresh OEM mesh straight into place.

Technical Specifications:
* Brand: Genuine Electrolux Group (AEG / Zanussi / Ikea OEM Spares)
* Component Designation: Chrome Wire Shelf / Drop-In Grill Pan Grid Insert
* Factory Master MPN: 140067172050
* Alternative Factory Cross-References: 140064796018, 5616572011, 5617733018
* Global Logistics EAN: 7321423929192 (Alternative legacy EAN: 7321422870631)
* Structural Length (Horizontal Edge): 468 mm (46.8 cm)
* Structural Width (Vertical Depth Edge): 382 mm (38.2 cm)
* Structural Mesh Height (Thickness): 23.6 mm
* Casing Formulation: Electroplated Gloss Chrome Steel Core Wire
* Net Component Weight: 878 grams